Reducere la transport de până la 22 Lei pentru comenzile de peste 500 Lei!

Află mai multe
Lacuri

Isomat Varnish-pu Lac de Impregnare Poliuretanic Bicomponent pe Bază de Apă Incolor Satinat 1 kg

Isomat VARNISH-PU 2K-W impregnating varnish is a two-component, water-based polyurethane coating. It protects and waterproofs trowel-finished cement screed, concrete, natural stone, and wood, forming...

Isomat VARNISH-PU 2K-W impregnating varnish is a two-component, water-based polyurethane coating. It protects and waterproofs trowel-finished cement screed, concrete, natural stone, and wood, forming a transparent satin-matt film that does not yellow when exposed to ultraviolet radiation. It is resistant to weather, cleaning agents, oils, seawater, and...

Vezi Descrierea & Specificațiile Vezi Descrierea & Specificațiile
449 86 Lei
Livrare lun, 16 noi - vin, 20 noi
12,00 Lei   costul de livrare
Trimis de la Grecia
De la mollaoglou.gr
Grecia
10 bucăți
Vezi Vopsele și materiale de vopsit pe pagina de mollaoglou.gr

Descriere și specificații

Isomat VARNISH-PU 2K-W impregnating varnish is a two-component, water-based polyurethane coating. It protects and waterproofs trowel-finished cement screed, concrete, natural stone, and wood, forming a transparent satin-matt film that does not yellow when exposed to ultraviolet radiation. It is resistant to weather, cleaning agents, oils, seawater, and alkalis. The coated surface can withstand pedestrian traffic and light vehicle traffic.

Apply with a roller, brush, or spray in 2 to 4 coats. The substrate must be dry and clean, with a moisture content below 4%, and relative humidity must be below 65%. Mix components A and B at a ratio of 100:25 by weight. The mixture can be diluted with up to 10% water. Clean tools with water while the product is still wet.

  • Type: Impregnating varnish
  • Composition: Two-component polyurethane
  • Thinner: Water
  • Colour: Clear
  • Gloss level: Satin matt
  • Suitable surfaces: Trowel-finished cement screed, concrete, natural stone, wood, and epoxy coatings
  • Application: Roller, brush, or spray
  • Coats: 2–4
  • Time between coats: Up to 24 hours
  • Mixing ratio: A:B 100:25 by weight
  • Maximum dilution: Up to 10% water by weight
  • Application and curing temperature: From +8 °C to +35 °C
  • Substrate moisture: Below 4%
  • Relative humidity: Below 65%
  • Pot life: 1 h at +23 °C
  • Coverage: 70–120 g/m² per coat
  • Density: 1.02 kg/l for the A+B mixture
  • Viscosity: 200 mPa·s at +23 °C
  • Tensile strength: 40 N/mm²
  • Hardness: Shore D 63
  • Impact resistance: 6 Nm
  • Waterproofing: 5 atm according to DIN 1048
  • Adhesion to concrete: 2.8 N/mm²
  • Water vapour permeability: Sd = 0.66 m
  • VOC content: Up to 140 g/l
  • Weight: 1 kg

Producător

Tip
Lac de impregnare
Materialul blatului
Piatră, Lemn
Grad de luciu
Satinat
Insecticid / Fungicid
Nu
Diluare
pentru apa
Poliuretanic
Da
Bicomponente
Da
Greutate
1 kg
Nuanță
Incolor

Informații importante

Specificațiile sunt colectate de pe site-urile oficiale ale producătorilor. Te rugăm să verifici specificațiile înainte de a finaliza comanda. În cazul în care întâmpini probleme, raportează aici.

449,86 Lei
12,00 Lei   costul de livrare